X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
4cxn36%20000%20etc4cxn36%20002
Diaphragm Material
Magnet Material
LF Voice Coil Diameter
HF Voice Coil Diameter
LF Continuous Power Handling
 
 
 
 
 
 

Key Features

  • 200 W continuous program power capacity
  • 70° nominal coverage
  • 95 - 18000 Hz response
  • 86 dB sensitivity
  • 21.5 mm (0.85”) HF unit exit diameter
  • Neodymium magnet allows a very light yet powerful motor assembly
  • Aluminium demodulating ring allows a very low distortion figure

Specifications

  • Nominal Diameter100 mm (4.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance LF6.4 Ω
  • Minimum Impedance HF11.0 Ω
  • Frequency Range95 - 18000 Hz
  • Dispersion Angle170 °
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Magnet MaterialNeodymium Inside Slug

Specifications LF Unit

  • LF Sensitivity286.0 dB
  • LF Nominal Power Handling3100 W
  • LF Continuous Power Handling4200 W
  • LF Voice Coil Diameter33 mm (1.3 in)
  • LF Winding MaterialCopper
  • LF Flux Density0.8 T
  • Former MaterialGlass Fibre
  • Winding Depth11.0 mm (0.43 in)
  • Magnetic Gap Depth6.0 mm (0.24 in)

Specifications HF Unit

  • HF Sensitivity599.0 dB
  • HF Nominal Power Handling625 W
  • HF Continuous Power Handling750 W
  • HF Voice Coil Diameter36 mm (1.4 in)
  • HF Winding MaterialAluminium
  • HF Flux Density1.5 T
  • Diaphragm MaterialHT Polymer
  • Recommended Crossover82.0 kHz
  • Inductance0.14 mH

Parameters

  • Resonance Frequency94 Hz
  • Re5.4 Ω
  • Qes0.8
  • Qms15.75
  • Qts0.76
  • Vas1.9 dm3 (0.07 ft3)
  • Sd56.0 cm2 (8.68 in2)
  • η₀0.19 %
  • Xmax4.0 mm
  • Xvar4.0 mm
  • Mms6.8 g
  • Bl5.25 Txm
  • Le0.75 mH
  • EBP117 Hz

Mounting And Shipping Info

  • Overall Diameter127 mm (5.0 in)
  • Bolt Circle Diameter114 mm (4.51 in)
  • Baffle Cutout Diameter103 mm (4.06 in)
  • Depth84 mm (3.31 in)
  • Flange and Gasket Thickness1 mm (0.04 in)
  • Net Weight0.54 kg (1.19 lb)
  • Shipping Units1
  • Shipping Weight0.75 kg (1.65 lb)
  • Shipping Box210x210x125 mm (8.27x8.27x4.92 in)

Service Kit

  • Service Kit LFRCK004CXN368
  • Replacement diaphragmMMDDE11016
  • Included by –6 dB down points.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated nominal impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated nominal impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • 12 dB/oct. or higher slope high-pass filter.
  • Investor center
  • Credits
  • Privacy Policy
  • P.IVA/VAT 01398890481