X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
13_37_51_843_10fw6413_37_52_271_file13_37_52_111_10fw64rear_b
Continuous power handling
Voice coil diameter
Magnet material
 
 
 

Features

  • 500 W continuous program power capacity
  • 64 mm (2.5 in) aluminium voice coil
  • 65 - 3000 Hz response
  • 98 dB sensitivity

Specifications

  • Nominal Diameter250 mm (10.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.4 Ω
  • Nominal Power Handling1250 W
  • Continuous power handling2500 W
  • Sensitivity (1W/1m)398.0 dB
  • Frequency Range65 - 3000 Hz
  • Voice Coil Diameter64 mm (2.5 in)
  • Winding MaterialAluminium
  • Former MaterialGlass Fibre
  • Winding Depth14.0 mm (0.55 in)
  • Magnetic Gap Depth8.0 mm (0.31 in)
  • Flux Density1.25 T

Design

  • Surround ShapeDouble Roll
  • Cone ShapeExponential
  • Magnet MaterialFerrite
  • SpiderSingle
  • Pole DesignT-Pole
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Recommended Enclosure26.0 dm3 (0.92 ft3)
  • Recommended Tuning62 Hz

Parameters4

  • Resonance Frequency63 Hz
  • Re5.0 Ω
  • Qes0.25
  • Qms3.4
  • Qts0.23
  • Vas27.0 dm3 (0.95 ft3)
  • Sd320.0 cm2 (50.0 in2)
  • η₀2.6 %
  • Xmax± 5.0 mm
  • Xvar± 5.5 mm
  • Mms34.0 g
  • Bl16.4 Txm
  • Le0.9 mH
  • EBP252 Hz

Mounting and Shipping Info

  • Overall Diameter261 mm (10.3 in)
  • Bolt Circle Diameter245 mm (9.6 in)
  • Baffle Cutout Diameter230.0 mm (8.8 in)
  • Depth116 mm (4.6 in)
  • Flange and Gasket Thickness13 mm (0.5 in)
  • Air Volume Occupied by Driver2.5 dm3 (0.09 ft3)
  • Net Weight5.4 kg (11.9 lb)
  • Shipping Units1
  • Shipping Weight6.0 kg (13.23 lb)
  • Shipping Box295x314x175 mm (11.61x12.36x6.89 in)

Service Kit

  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.