X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
12cl76rear_old%2000W1siziisijiwmtmvmdevmtuvmduvmjevmzcvnzcwl2zpbguixsxbinailcj0ahvtyiisijeymdb4njawil0swyjliiwicg5nil1d
Continuous Power Handling
Voice Coil Diameter
Magnet Material
 
 
 
 

Key Features

  • 700 W continuous program power capacity
  • 76 mm (3 in) copper voice coil
  • 45 - 3000 Hz response
  • 98.5 dB sensitivity
  • Ventilated voice coil gap for reduced power compression

Specifications

  • Nominal Diameter320 mm (12.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.5 Ω
  • Nominal Power Handling1350 W
  • Continuous Power Handling2700 W
  • Sensitivity398.5 dB
  • Frequency Range45 - 3000 Hz
  • Voice Coil Diameter76 mm (3.0 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth17.0 mm (0.67 in)
  • Magnetic Gap Depth11.0 mm (0.43 in)
  • Flux Density1.05 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeExponential
  • Magnet MaterialNeodymium Inside Slug
  • SpiderSingle
  • Pole DesignStraight Pole
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Recommended Enclosure40.0 dm3 (1.41 ft3)
  • Recommended Tuning60 Hz

Parameters4

  • Resonance Frequency48 Hz
  • Re5.2 Ω
  • Qes0.22
  • Qms4.8
  • Qts0.21
  • Vas59.0 dm3 (2.1 ft3)
  • Sd522.0 cm2 (80.9 in2)
  • η₀2.9 %
  • Xmax6.0 mm
  • Xvar8.5 mm
  • Mms70.0 g
  • Bl22.4 Txm
  • Le1.5 mH
  • EBP218 Hz

Mounting And Shipping Info

  • Overall Diameter313 mm (12.32 in)
  • Bolt Circle Diameter299 mm (11.77 in)
  • Baffle Cutout Diameter282.0 mm (11.1 in)
  • Depth142 mm (5.59 in)
  • Flange and Gasket Thickness9 mm (0.35 in)
  • Air Volume Occupied by Driver2.3 dm3 (0.08 ft3)
  • Net Weight3.0 kg (6.6 lb)
  • Shipping Units1
  • Shipping Weight3.9 kg (8.6 lb)
  • Shipping Box360x360x200 mm (14.17x14.17x7.87 in)

Service Kit

  • RCK12CL768
  • 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.
  • Investor center
  • Credits
  • Privacy Policy
  • P.IVA/VAT 01398890481