X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
12nw100%2000W1siziisijiwmtmvmdevmtuvmduvmtkvmzkvmzc1l2zpbguixsxbinailcj0ahvtyiisijeymdb4njawil0swyjliiwicg5nil1d
Continuous Power Handling
Voice Coil Diameter
Magnet Material
 
 
 
 

Key Features

  • 2000 W continuous program power capacity
  • 100 mm (4 in) copper voice coil
  • 45 - 1500 Hz response
  • 96 dB sensitivity
  • FEA optimized Neodymium magnet assembly
  • Double silicone spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression

Specifications

  • Nominal Diameter320 mm (12.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.2 Ω
  • Nominal Power Handling11000 W
  • Continuous Power Handling22000 W
  • Sensitivity396.0 dB
  • Frequency Range45 - 1500 Hz
  • Voice Coil Diameter100 mm (4.0 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth25.0 mm (1.0 in)
  • Magnetic Gap Depth12.0 mm (0.5 in)
  • Flux Density1.2 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeRadial
  • Magnet MaterialNeodymium Inside Slug
  • SpiderDouble Silicone
  • Pole DesignT-Pole
  • Woofer Cone TreatmentTWP Waterproof Both Sides
  • Recommended Enclosure50.0 dm3 (1.77 ft3)
  • Recommended Tuning50 Hz

Parameters4

  • Resonance Frequency42 Hz
  • Re5.1 Ω
  • Qes0.21
  • Qms3.6
  • Qts0.2
  • Vas44.0 dm3 (1.5 ft3)
  • Sd531.0 cm2 (82.3 in2)
  • η₀1.7 %
  • Xmax9.0 mm
  • Xvar10.0 mm
  • Mms119.0 g
  • Bl28.0 Txm
  • Le1.9 mH
  • EBP200 Hz

Mounting And Shipping Info

  • Overall Diameter319 mm (12.5 in)
  • Bolt Circle Diameter299 mm (11.8 in)
  • Baffle Cutout Diameter281.0 mm (11.1 in)
  • Depth137 mm (5.4 in)
  • Flange and Gasket Thickness13 mm (0.5 in)
  • Air Volume Occupied by Driver2.7 dm3 (0.09 ft3)
  • Net Weight8.2 kg (18.0 lb)
  • Shipping Units1
  • Shipping Weight9.1 kg (20.06 lb)
  • Shipping Box360x360x200 mm (14.17x14.17x7.87 in)

Service Kit

  • RCK12NW1008
  • 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.
  • Investor center
  • Credits
  • Privacy Policy
  • P.IVA/VAT 01398890481