X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
16_36_35_846_file16_36_36_5_file
Continuous power handling
Voice coil diameter
Magnet material
 
 
 
 

Features

  • 2400 W continuous program power capacity
  • 100 mm (4 in) copper voice coil
  • 35 - 1000 Hz response
  • 98 dB sensitivity
  • FEA optimized Neodymium magnet assembly
  • Double silicone spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression

Specifications

  • Nominal Diameter460 mm (18.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.3 Ω
  • Nominal Power Handling11200 W
  • Continuous power handling22400 W
  • Sensitivity (1W/1m)398.0 dB
  • Frequency Range35 - 1000 Hz
  • Voice Coil Diameter100 mm (4.0 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth25.0 mm (1.0 in)
  • Magnetic Gap Depth12.0 mm (0.5 in)
  • Flux Density1.2 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeRadial
  • Magnet MaterialNeodymium Inside Slug
  • SpiderDouble Silicone
  • Pole DesignT-Pole
  • Woofer Cone TreatmentTWP Waterproof Both Sides
  • Recommended Enclosure160.0 dm3 (5.65 ft3)
  • Recommended Tuning37 Hz

Parameters4

  • Resonance Frequency31 Hz
  • Re5.1 Ω
  • Qes0.27
  • Qms4.2
  • Qts0.26
  • Vas252.0 dm3 (8.9 ft3)
  • Sd1210.0 cm2 (187.6 in2)
  • η₀2.7 %
  • Xmax± 9.0 mm
  • Xvar± 11.0 mm
  • Mms211.0 g
  • Bl28.0 Txm
  • Le1.7 mH
  • EBP114 Hz

Mounting and Shipping Info

  • Overall Diameter460 mm (18.0 in)
  • Bolt Circle Diameter440 mm (17.3 in)
  • Baffle Cutout Diameter422.0 mm (16.6 in)
  • Depth209 mm (8.2 in)
  • Flange and Gasket Thickness16 mm (0.62 in)
  • Air Volume Occupied by Driver8.5 dm3 (0.3 ft3)
  • Net Weight9.05 kg (19.95 lb)
  • Shipping Weight10.65 kg (23.48 lb)
  • Shipping Box500x495x275 mm (19.69x19.49x10.83 in)

Service Kit

  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.