Features
- 700 W continuous program power capacity
- 76 mm (3 in) aluminium voice coil
- 55 - 4000 Hz response
- 96 dB sensitivity
- Shorting copper cap for extended HF response
Specifications
- Nominal Diameter250 mm (10.0 in)
- Nominal Impedance8 Ω
- Minimum Impedance7.1 Ω
- Nominal Power Handling1350 W
- Continuous power handling2700 W
- Sensitivity (1W/1m)396.0 dB
- Frequency Range55 - 4000 Hz
- Voice Coil Diameter76 mm (3.0 in)
- Winding MaterialAluminium
- Former MaterialGlass Fibre
- Winding Depth18.0 mm (0.71 in)
- Magnetic Gap Depth10.0 mm (0.4 in)
- Flux Density0.9 T
Design
- Surround ShapeDouble Roll
- Cone ShapeExponential
- Magnet MaterialFerrite
- SpiderSingle
- Pole DesignT-Pole
- Woofer Cone TreatmentNone
- Recommended Enclosure25.0 dm3 (0.88 ft3)
- Recommended Tuning65 Hz
Parameters4
- Resonance Frequency54 Hz
- Re6.0 Ω
- Qes0.33
- Qms2.9
- Qts0.29
- Vas38.0 dm3 (1.3 ft3)
- Sd320.0 cm2 (49.1 in2)
- η₀1.8 %
- Xmax± 5.5 mm
- Xvar± 5.0 mm
- Mms33.0 g
- Bl14.1 Txm
- Le1.2 mH
- EBP163 Hz
Mounting and Shipping Info
- Overall Diameter262 mm (10.3 in)
- Bolt Circle Diameter245 mm (9.6 in)
- Baffle Cutout Diameter230.0 mm (8.8 in)
- Depth123 mm (4.8 in)
- Flange and Gasket Thickness14 mm (0.55 in)
- Air Volume Occupied by Driver0.0 dm3 (0.0 ft3)
- Net Weight6.05 kg (13.34 lb)
- Shipping Units1
- Shipping Weight6.65 kg (14.66 lb)
- Shipping Box295x314x175 mm (11.61x12.36x6.89 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.