X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
14cnx76rear14cnx76front14cnx76rear_b
Diaphragm Material
Magnet Material
LF Voice Coil Diameter
HF Voice Coil Diameter
LF Nominal Power Handling
 
 
 
 
 
 
 

Specifications

  • Nominal Diameter355 mm (14.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance LF6.5 Ω
  • Minimum Impedance HF8.2 Ω
  • Frequency Range45 - 18000 Hz
  • Dispersion Angle180 °
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Magnet MaterialNeodymium Ring

Specifications LF Unit

  • LF Sensitivity2100.0 dB
  • LF Nominal Power Handling3400 W
  • LF Continuous Power Handling4800 W
  • LF Voice Coil Diameter76 mm (3.0 in)
  • LF Winding MaterialCopper
  • LF Flux Density1.05 T
  • Former MaterialGlass Fibre
  • Winding Depth16.5 mm (0.65 in)
  • Magnetic Gap Depth9.0 mm (0.35 in)

Specifications HF Unit

  • HF Sensitivity5105.0 dB
  • HF Nominal Power Handling680 W
  • HF Continuous Power Handling7160 W
  • HF Voice Coil Diameter75 mm (3.0 in)
  • HF Winding MaterialAluminium
  • HF Flux Density1.8 T
  • Diaphragm MaterialPolyester/Titanium
  • Recommended Crossover81.2 kHz
  • Inductance0.14 mH

Parameters

  • Resonance Frequency45 Hz
  • Re5.2 Ω
  • Qes0.29
  • Qms8.5
  • Qts0.28
  • Vas131.0 dm3 (4.63 ft3)
  • Sd707.0 cm2 (109.59 in2)
  • η₀4.0 %
  • Xmax6.0 mm
  • Xvar8.0 mm
  • Mms67 g
  • Bl18.4 Txm
  • Le1.0 mH
  • EBP155 Hz

Mounting And Shipping Info

  • Overall Diameter359 mm (14.13 in)
  • Bolt Circle Diameter343 mm (13.5 in)
  • Baffle Cutout Diameter323 mm (12.72 in)
  • Depth188 mm (7.4 in)
  • Flange and Gasket Thickness12 mm (0.47 in)
  • Net Weight5.6 kg (12.35 lb)
  • Shipping Units1
  • Shipping Weight6.9 kg (15.21 lb)
  • Shipping Box425x425x224 mm (16.73x16.73x8.82 in)

Service Kit

  • Service Kit LFRCK14CXN768
  • Replacement diaphragmMMD9028M
  • Included by –6 dB down points.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hour test made with continuous pink noise signal (6 dB crest factor) within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • 12 dB/oct. or higher slope high-pass filter.