X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

4CXN36

Coaxials 4.0 inches

back
4cxn36%20000%20etc4cxn36%20002
Diaphragm Material
Magnet Material
LF Voice Coil Diameter
HF Voice Coil Diameter
LF Nominal Power Handling
** Preliminary Data **
 
 
 
 
 
 

Key Features

  • 200 W continuous program power capacity
  • 70° nominal coverage
  • 100 - 18000 Hz response
  • 88 dB sensitivity
  • 21.5 mm (0.85”) HF unit exit diameter
  • Neodymium magnet allows a very light yet powerful motor assembly
  • Aluminium demodulating ring allows a very low distortion figure

Specifications

  • Nominal Diameter100 mm (4.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance LF6.4 Ω
  • Minimum Impedance HF6.5 Ω
  • Frequency Range100 - 18000 Hz
  • Dispersion Angle170 °
  • Woofer Cone TreatmentNone
  • Magnet MaterialNeodymium Inside Slug

Specifications LF Unit

  • LF Sensitivity288.0 dB
  • LF Nominal Power Handling3100 W
  • LF Continuous Power Handling4200 W
  • LF Voice Coil Diameter33 mm (1.3 in)
  • LF Winding MaterialCopper
  • LF Flux Density1.35 T
  • Former MaterialGlass Fibre
  • Winding Depth11.0 mm (0.43 in)
  • Magnetic Gap Depth6.0 mm (0.24 in)

Specifications HF Unit

  • HF Sensitivity599.0 dB
  • HF Nominal Power Handling625 W
  • HF Continuous Power Handling750 W
  • HF Voice Coil Diameter36 mm (1.4 in)
  • HF Winding MaterialAluminium
  • HF Flux Density1.5 T
  • Diaphragm MaterialHT Polymer
  • Recommended Crossover82.0 kHz
  • Inductance0.14 mH

Parameters

  • Resonance Frequency99 Hz
  • Re5.5 Ω
  • Qes0.76
  • Qms13.5
  • Qts0.72
  • Vas1.9 dm3 (0.07 ft3)
  • Sd56.0 cm2 (8.68 in2)
  • η₀0.25 %
  • Xmax4.0 mm
  • Xvar5.0 mm
  • Mms6.0 g
  • Bl5.3 Txm
  • Le0.8 mH
  • EBP130 Hz

Mounting And Shipping Info

  • Overall Diameter127 mm (5.0 in)
  • Bolt Circle Diameter114 mm (4.49 in)
  • Baffle Cutout Diameter103 mm (4.06 in)
  • Depth80 mm (3.15 in)
  • Flange and Gasket Thickness1 mm (0.04 in)
  • Net Weight0.55 kg (1.21 lb)
  • Shipping Units1
  • Shipping Weight0.75 kg (1.65 lb)
  • Shipping Box210x210x125 mm (8.27x8.27x4.92 in)

Service Kit

  • Service Kit LFRCK004CXN368
  • Replacement diaphragmMMDDE1108
  • Included by –6 dB down points.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83V.
  • 2 hour test made with continuous pink noise signal (6 dB crest factor) within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • 12 dB/oct. or higher slope high-pass filter.