X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
De%2010%2090%20riscalata%2000
Continuous Power Handling
Voice Coil Diameter
Diaphragm Material
Throat Diameter

The DE1090TN is the latest version of our premium 100mm (4.0 in) voice coil, neodymium high frequency driver.  The compact 127mm diameter was achieved using a specially designed inside ring neodymium magnet. The diaphragm used in DE1090TN has been completely redesigned to incorporate a bent edge voice coil former, as well as new dome and surround geometry. These modifications combine to better control diaphragm displacement and deformations, resulting in lower distortion and a smoother higher frequency response above 10kHz. 

 
 
 

Key Features

  • 240 W continuous program power capacity
  • 1.4" horn throat diameter
  • 100 mm (4 in) aluminium voice coil
  • Titanium diaphragm
  • 500 - 20000 Hz response
  • 108 dB sensitivity
  • Neodymium magnet assembly with shorting copper cap

Specifications1

  • Throat Diameter36 mm (1.4 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance8.3 Ω
  • Nominal Power Handling2120 W
  • Continuous Power Handling3240 W
  • Sensitivity4108.0 dB
  • Frequency Range500.0 - 20.0 kHz
  • Recommended Crossover50.8 kHz
  • Voice Coil Diameter100 mm (4.0 in)
  • Winding MaterialAluminium
  • Inductance0.18 mH
  • Diaphragm MaterialTitanium
  • Flux Density1.9 T
  • Magnet MaterialNeo Inside Ring

Mounting And Shipping Info

  • Four M6 holes 90° on 102 mm (4 in) diameter
  • Overall Diameter127 mm (5.0 in)
  • Depth54 mm (2.13 in)
  • Net Weight1.9 kg (4.19 lb)
  • Shipping Units4
  • Shipping Weight8.2 kg (18.08 lb)
  • Shipping Box295x160x180 mm (11.61x6.30x7.09 in)

Replacement Diaphragm

  • MMD1090TN8
  • Driver mounted on B&C ME90 horn
  • 2 hour test made with continuous pink noise signal (6 dB crest factor) within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • 12 dB/oct. or higher slope high-pass filter.