X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
12_41_09_96_10hpl64rear12_41_09_282_10hpl64front12_41_09_185_10hpl64rear_b
Continuous power handling
Voice coil diameter
Magnet material
 
 
 
 

Features

  • 400 W continuous program power capacity
  • 64 mm (2.5 in) aluminium voice coil
  • 60 - 4000 Hz response
  • 98.5 dB sensitivity
  • Neodymium magnet allows a very light yet powerful motor assembly

Specifications

  • Nominal Diameter250 mm (10.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.2 Ω
  • Nominal Power Handling1200 W
  • Continuous power handling2400 W
  • Sensitivity (1W/1m)398.5 dB
  • Frequency Range60 - 4000 Hz
  • Voice Coil Diameter64 mm (2.5 in)
  • Winding MaterialAluminium
  • Former MaterialGlass Fibre
  • Winding Depth12.0 mm (0.47 in)
  • Magnetic Gap Depth8.0 mm (0.31 in)
  • Flux Density1.25 T

Design

  • Surround ShapeDouble Roll
  • Cone ShapeExponential
  • Magnet MaterialNeodymium Inside Slug
  • SpiderSingle
  • Pole DesignStraight Pole
  • Woofer Cone TreatmentNone
  • Recommended Enclosure26.0 dm3 (0.92 ft3)
  • Recommended Tuning67 Hz

Parameters4

  • Resonance Frequency61 Hz
  • Re5.4 Ω
  • Qes0.33
  • Qms4.5
  • Qts0.31
  • Vas32.0 dm3 (1.1 ft3)
  • Sd320.0 cm2 (50.0 in2)
  • η₀2.5 %
  • Xmax± 4.0 mm
  • Xvar± 5.5 mm
  • Mms29.0 g
  • Bl15.0 Txm
  • Le0.5 mH
  • EBP184 Hz

Mounting and Shipping Info

  • Overall Diameter261 mm (10.3 in)
  • Bolt Circle Diameter245 mm (9.6 in)
  • Baffle Cutout Diameter230.0 mm (9.1 in)
  • Depth122 mm (4.8 in)
  • Flange and Gasket Thickness13 mm (0.5 in)
  • Air Volume Occupied by Driver1.5 dm3 (0.05 ft3)
  • Net Weight1.95 kg (4.3 lb)
  • Shipping Units1
  • Shipping Weight2.55 kg (5.62 lb)
  • Shipping Box295x314x175 mm (11.61x12.36x6.89 in)

Service Kit

  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.