X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
12nbx100rearW1siziisijiwmtmvmdevmtuvmduvmjivndavode0l2zpbguixsxbinailcj0ahvtyiisijeymdb4njawil0swyjliiwicg5nil1d12nbx100rear_b
Continuous Power Handling
Voice Coil Diameter
Magnet Material
 
 
 
 

Key Features

  • 2000 W continuous program power capacity
  • 100 mm (4 in) copper voice coil
  • 40 - 1500 Hz response
  • 96 dB sensitivity
  • FEA optimized Neodymium magnet assembly
  • Aluminium demodulating ring allows a very low distortion figure
  • Double silicone spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression

Specifications

  • Nominal Diameter320 mm (12.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.5 Ω
  • Nominal Power Handling11000 W
  • Continuous Power Handling22000 W
  • Sensitivity396.0 dB
  • Frequency Range40 - 1500 Hz
  • Voice Coil Diameter100 mm (4.0 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth25.0 mm (1.0 in)
  • Magnetic Gap Depth11.0 mm (0.43 in)
  • Flux Density1.1 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeExponential
  • Magnet MaterialNeodymium Ring
  • SpiderDouble Silicone
  • Pole DesignT-Pole
  • Woofer Cone TreatmentTWP Waterproof Both Sides
  • Recommended Enclosure40.0 dm3 (1.41 ft3)
  • Recommended Tuning50 Hz

Parameters4

  • Resonance Frequency41 Hz
  • Re5.1 Ω
  • Qes0.24
  • Qms3.9
  • Qts0.22
  • Vas51.0 dm3 (1.8 ft3)
  • Sd531.0 cm2 (82.0 in2)
  • η₀1.45 %
  • Xmax10.0 mm
  • Xvar10.0 mm
  • Mms117.0 g
  • Bl25.6 Txm
  • Le1.9 mH
  • EBP170 Hz

Mounting And Shipping Info

  • Overall Diameter320 mm (12.6 in)
  • Bolt Circle Diameter300 mm (11.8 in)
  • Baffle Cutout Diameter280.0 mm (11.0 in)
  • Depth143 mm (5.63 in)
  • Flange and Gasket Thickness12 mm (0.47 in)
  • Air Volume Occupied by Driver4.0 dm3 (0.14 ft3)
  • Net Weight8.0 kg (17.6 lb)
  • Shipping Units1
  • Shipping Weight8.9 kg (19.62 lb)
  • Shipping Box360x360x200 mm (14.17x14.17x7.87 in)

Service Kit

  • RCK12NBX1008
  • 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.