X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
14ndl76%2000FrontRear_b
Continuous Power Handling
Voice Coil Diameter
Magnet Material
 
 
 
 

Key Features

  • 1000 W continuous program power capacity
  • 76 mm (3 in) copper voice coil
  • 40 - 3000 Hz response
  • 99 dB sensitivity
  • Very light yet powerful motor assembly
  • Aluminium demodulating ring allows a very low distortion figure

Specifications

  • Nominal Diameter359 mm (14.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.1 Ω
  • Nominal Power Handling1500 W
  • Continuous Power Handling21000 W
  • Sensitivity399.0 dB
  • Frequency Range40 - 3000 Hz
  • Voice Coil Diameter76 mm (3.0 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth21.0 mm (0.83 in)
  • Magnetic Gap Depth10.0 mm (0.4 in)
  • Flux Density1.15 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeExponential
  • Magnet MaterialNeodymium Inside Slug
  • SpiderSingle
  • Pole DesignT-Pole
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Recommended Enclosure75.0 dm3 (2.65 ft3)
  • Recommended Tuning53 Hz

Parameters4

  • Resonance Frequency41 Hz
  • Re5.0 Ω
  • Qes0.31
  • Qms8.2
  • Qts0.3
  • Vas123.0 dm3 (4.34 ft3)
  • Sd707.0 cm2 (109.59 in2)
  • η₀2.7 %
  • Xmax8.0 mm
  • Xvar9.5 mm
  • Mms85.0 g
  • Bl19.0 Txm
  • Le1.1 mH
  • EBP132 Hz

Mounting And Shipping Info

  • Overall Diameter359 mm (14.13 in)
  • Bolt Circle Diameter343 mm (13.5 in)
  • Baffle Cutout Diameter323.0 mm (12.72 in)
  • Depth161 mm (6.34 in)
  • Flange and Gasket Thickness12 mm (0.47 in)
  • Air Volume Occupied by Driver3.0 dm3 (0.11 ft3)
  • Net Weight4.5 kg (9.92 lb)
  • Shipping Units1
  • Shipping Weight5.8 kg (12.79 lb)
  • Shipping Box425x425x224 mm (16.73x16.73x8.82 in)

Service Kit

  • RCK14NDL76
  • 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.