X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
FileFile15tbw100rear_2
Continuous Power Handling
Voice Coil Diameter
Magnet Material
 
 
 
 

Specifications

  • Nominal Diameter380 mm (15.0 in)
  • Nominal Impedance4 Ω
  • Minimum Impedance4.2 Ω
  • Nominal Power Handling11500 W
  • Continuous Power Handling23000 W
  • Sensitivity395.0 dB
  • Frequency Range40 - 1500 Hz
  • Voice Coil Diameter100 mm (4.0 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth31 mm (1.22 in)
  • Magnetic Gap Depth15 mm (0.59 in)
  • Flux Density1.15 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeRadial
  • Magnet MaterialFerrite
  • SpiderDouble Silicone
  • Pole DesignT-Pole
  • Woofer Cone TreatmentTWP Waterproof Both Sides
  • Recommended Enclosure95.0 dm3 (3.35 ft3)
  • Recommended Tuning40 Hz

Parameters4

  • Resonance Frequency39 Hz
  • Re3.2 Ω
  • Qes0.3
  • Qms5.55
  • Qts0.28
  • Vas88.0 dm3 (3.11 ft3)
  • Sd855.0 cm2 (132.5 in2)
  • η₀1.64 %
  • Xmax12.0 mm
  • Xvar13.5 mm
  • Mms197 g
  • Bl22.56 Txm
  • Le1.64 mH
  • EBP130 Hz

Mounting And Shipping Info

  • Overall Diameter393 mm (15.5 in)
  • Bolt Circle Diameter374 mm (14.7 in)
  • Baffle Cutout Diameter354.0 mm (13.9 in)
  • Depth191 mm (7.52 in)
  • Flange and Gasket Thickness14 mm (0.55 in)
  • Air Volume Occupied by Driver6.0 dm3 (0.21 ft3)
  • Net Weight14.3 kg (31.5 lb)
  • Shipping Units1
  • Shipping Weight15.6 kg (34.39 lb)
  • Shipping Box425x425x224 mm (16.73x16.73x8.82 in)

Service Kit

  • RCK15TBW1004
  • 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2V for 4 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.