X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
18nbx100%2000W1siziisijiwmtmvmdevmtuvmduvmjivntivmjkyl2zpbguixsxbinailcj0ahvtyiisijeymdb4njawil0swyjliiwicg5nil1d18nbx100rearb
Continuous Power Handling
Voice Coil Diameter
Magnet Material
 
 
 
 

Key Features

  • 2400 W continuous program power capacity
  • 100 mm (4 in) split winding copper voice coil
  • 35 - 1000 Hz response
  • 96 dB sensitivity
  • 57 mm peak-to-peak excursion before damage
  • Double silicone spider with optimized compliance
  • Ventilated voice coil gap for reduced power compression
  • Aluminium demodulating ring for very low distortion

Specifications

  • Nominal Diameter460 mm (18.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.0 Ω
  • Nominal Power Handling11200 W
  • Continuous Power Handling22400 W
  • Sensitivity396.5 dB
  • Frequency Range35 - 1000 Hz
  • Voice Coil Diameter100 mm (4.0 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth25.0 mm (1.0 in)
  • Magnetic Gap Depth11.0 mm (0.43 in)
  • Flux Density1.1 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeRadial
  • Magnet MaterialNeodymium Ring
  • SpiderDouble Silicone
  • Pole DesignT-Pole
  • Woofer Cone TreatmentTWP Waterproof Both Sides
  • Recommended Enclosure200.0 dm3 (7.1 ft3)
  • Recommended Tuning35 Hz

Parameters4

  • Resonance Frequency35 Hz
  • Re5.2 Ω
  • Qes0.4
  • Qms5.6
  • Qts0.38
  • Vas198.0 dm3 (7.0 ft3)
  • Sd1210.0 cm2 (187.6 in2)
  • η₀2.0 %
  • Xmax10.0 mm
  • Xvar12.0 mm
  • Mms217.0 g
  • Bl24.8 Txm
  • Le1.85 mH
  • EBP87 Hz

Mounting And Shipping Info

  • Overall Diameter460 mm (18.0 in)
  • Bolt Circle Diameter440 mm (17.3 in)
  • Baffle Cutout Diameter422.0 mm (16.6 in)
  • Depth208 mm (8.19 in)
  • Flange and Gasket Thickness14 mm (0.55 in)
  • Air Volume Occupied by Driver8.5 dm3 (0.3 ft3)
  • Net Weight9.3 kg (20.5 lb)
  • Shipping Units1
  • Shipping Weight10.9 kg (24.03 lb)
  • Shipping Box500x495x275 mm (19.69x19.49x10.83 in)

Service Kit

  • RCK18NBX1008
  • 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.