X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
18rbx100rear%200018rbx100front18rbx100rear_b
Continuous Power Handling
Voice Coil Diameter
Magnet Material

The new B&C 18RBX100 anchors our ferrite subwoofer line, and features an all new FEA optimized motor structure. The 25mm high, 4” (100mm) diameter copper wire voice coil is combined with a laminated double silicone spider, water resistant curvilinear cone and triple roll surround, for even more excursion and linearity.

The corrosion resistant motor structure incorporates an aluminum demodulation ring that effectively controls inductive rise as well as harmonic and intermodulation distortion. This subwoofer can be used for a wide variety of applications, including compact vented enclosures as small as 120 litres.

 
 
 
 

Key Features

  • 2000 W continuous program power capacity
  • 100 mm (4 in) copper voice coil
  • 35 - 1000 Hz response
  • 97 dB sensitivity
  • Aluminium demodulating ring allows a very low distortion figure
  • Double silicone spider with optimized compliance

Specifications

  • Nominal Diameter460 mm (18.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.2 Ω
  • Nominal Power Handling11000 W
  • Continuous Power Handling22000 W
  • Sensitivity397.0 dB
  • Frequency Range40 - 1000 Hz
  • Voice Coil Diameter100 mm (4.0 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth25.0 mm (1.0 in)
  • Magnetic Gap Depth11.0 mm (0.43 in)
  • Flux Density1.1 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeCurvilinear
  • Magnet MaterialFerrite
  • SpiderDouble Silicone
  • Pole DesignT-Pole
  • Woofer Cone TreatmentTWP Waterproof Both Sides
  • Recommended Enclosure140.0 dm3 (4.94 ft3)
  • Recommended Tuning40 Hz

Parameters4

  • Resonance Frequency40 Hz
  • Re5.1 Ω
  • Qes0.36
  • Qms7.3
  • Qts0.34
  • Vas220.0 dm3 (7.77 ft3)
  • Sd1225.0 cm2 (189.88 in2)
  • η₀2.2 %
  • Xmax10.0 mm
  • Xvar13.0 mm
  • Mms199.0 g
  • Bl25.1 Txm
  • Le1.5 mH
  • EBP111 Hz

Mounting And Shipping Info

  • Overall Diameter460 mm (18.11 in)
  • Bolt Circle Diameter440 mm (17.32 in)
  • Baffle Cutout Diameter422.0 mm (16.61 in)
  • Depth200 mm (7.87 in)
  • Flange and Gasket Thickness14 mm (0.55 in)
  • Air Volume Occupied by Driver10.5 dm3 (0.37 ft3)
  • Net Weight12.3 kg (27.12 lb)
  • Shipping Units1
  • Shipping Weight13.9 kg (30.64 lb)
  • Shipping Box500x495x275 mm (19.69x19.49x10.83 in)

Service Kit

  • RCK18RBX1008
  • 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.