X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

WG400

Line Array Sources 1.0 inches

back
W1siziisijiwmtmvmdevmtuvmduvmzevmzkvni9mawxlil0swyjwiiwidgh1bwiilcixmjawedywmcjdlfsizsisinbuzyjdxq
Exit Size
Horizontal Coverage
Wave guide horn not sold separately - Not available in the USA
 
 
 
 
 

Key Features

  • Line Array optimized Waveguide with DE400 driver
  • 140° max horizontal coverage
  • 100 W continuous program power capacity
  • 44 mm (1.7 in) aluminium voice coil
  • Polyimide diaphragm
  • 1200 - 18000 Hz response
  • 108.5 dB sensitivity
  • Compact Neodymium magnet assembly

Specifications

  • Horizontal Coverage140 ° Max
  • Active Radiating Factor92.5 %
  • Recommended Crossover11.5 kHz
  • Waveguide MaterialCast Aluminium
  • Nominal Impedance8 Ω
  • Minimum Impedance7.7 Ω
  • Nominal Power Handling250 W
  • Continuous Power Handling3100 W
  • Sensitivity4108.5 dB
  • Frequency Range51.0 - 18.0 kHz
  • Voice Coil Diameter44 mm (1.7 in)
  • Winding MaterialAluminium
  • Diaphragm MaterialPolyimide
  • Flux Density1.8 T
  • Magnet MaterialNeodymium Ring

Mounting And Shipping Info

  • Exit Size102x25 mm (4x1 in)
  • Driver Diameter86 mm (3.3 in)
  • Dimensions111x87x155 mm (4.4x3.5x6.1 in)
  • Net Weight1.3 kg (2.9 lb)
  • Shipping Units4
  • Shipping Weight5.8 kg (12.79 lb)
  • Shipping Box265x245x240 mm (10.43x9.65x9.45 in)
  • 12 dB/oct. Or higher slope high-pass filter.
  • 2 hour test made with continuous pink noise signal (6 dB crest factor) within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance.
  • Power on Continuous Program is defined as 3 dB greater then the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Waveguide mounted on 90°x10° bell horn