X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

WGX990TN

Line Array Sources 1.4 inches

back
Wgx990tn%20h163%20b
Continuous Power Handling
Exit Size
Horizontal Coverage
Wave guide horn not sold separately
 
 
 

Key Features

  • Line Array optimized Waveguide with DE990TN driver
  • 120° max horizontal coverage
  • 200 W continuous program power capacity
  • 86 mm (3.4 in) CCAW voice coil
  • Titanium diaphragm
  • 500 - 18000 Hz response
  • 107.5 dB sensitivity
  • Neodymium magnet assembly with shorting copper cap

Specifications

  • Horizontal Coverage120 ° Max
  • Active Radiating Factor93.7 %
  • Recommended Crossover11.0 kHz
  • Waveguide MaterialCast Aluminium
  • Nominal Impedance8 Ω
  • Minimum Impedance7.8 Ω
  • Nominal Power Handling2100 W
  • Continuous Power Handling3200 W
  • Sensitivity4107.5 dB
  • Frequency Range5500.0 - 18.0 kHz
  • Voice Coil Diameter86 mm (3.4 in)
  • Winding MaterialCCAW
  • Diaphragm MaterialTitanium
  • Flux Density1.9 T
  • Magnet MaterialNeo Inside Ring

Mounting And Shipping Info

  • Exit Size153x25 mm (6x1 in)
  • Driver Diameter115 mm (4.53 in)
  • Dimensions163x130x243 mm (6.42x5.12x9.57 in)
  • Net Weight2.95 kg (6.5 lb)
  • Shipping Units1
  • Shipping Weight3.05 kg (6.72 lb)
  • Shipping Box245x140x175 mm (9.6x5.5x6.9 in)
  • 12 dB/oct. Or higher slope high-pass filter.
  • 2 hour test made with continuous pink noise signal (6 dB crest factor) within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance.
  • Power on Continuous Program is defined as 3 dB greater then the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Waveguide mounted on 90°x10° bell horn