Features
- 500 W continuous program power capacity
- 70° nominal coverage
- 65 - 18000 Hz response
- 95 dB sensitivity
- 33 mm (1.3”) HF unit exit diameter
Specifications
- Nominal Diameter250 mm (10.0 in)
- Nominal Impedance8 Ω
- Minimum Impedance LF6.4 Ω
- Minimum Impedance HF7.0 Ω
- Frequency Range65 - 18000 Hz
- Dispersion Angle170 °
- Woofer Cone TreatmentWP Waterproof Front Side
- Magnet MaterialFerrite -
Specifications LF unit
- LF Sensitivity295.0 dB
- LF Nominal Power Handling3250 W
- LF Continuous Power Handling4500 W
- LF Voice Coil Diameter64 mm (2.5 in)
- LF Winding MaterialCopper
- LF Flux Density0.96 T
- Former MaterialKapton
- Winding Depth13.0 mm (0.51 in)
- Magnetic Gap Depth8.0 mm (0.31 in)
Specifications HF unit
- HF Sensitivity5104.0 dB
- HF Nominal Power Handling680 W
- HF Continuous Power Handling7160 W
- HF Voice Coil Diameter65 mm (2.5 in)
- HF Winding MaterialAluminium
- HF Flux Density1.6 T
- Diaphragm MaterialTitanium
- Recommended Crossover81.2 kHz
- Inductance0.15 mH
Parameters
- Resonance Frequency63 Hz
- Re5.5 Ω
- Qes0.44
- Qms7.9
- Qts0.42
- Vas25.0 dm3 (0.89 ft3)
- Sd320.0 cm2 (49.1 in2)
- η₀1.4 %
- Xmax± 5.5 mm
- Xvar± 6.0 mm
- Mms37.0 g
- Bl13.4 Txm
- Le1.2 mH
- EBP143 Hz
Mounting and Shipping Info
- Overall Diameter261 mm (10.3 in)
- Bolt Circle Diameter245 mm (9.6 in)
- Baffle Cutout Diameter230 mm (8.8 in)
- Depth140 mm (5.51 in)
- Flange and Gasket Thickness11 mm (0.43 in)
- Net Weight5.65 kg (12.8 lb)
- Shipping Units1
- Shipping Weight6.55 kg (14.44 lb)
- Shipping Box360x360x200 mm (14.17x14.17x7.87 in)
- Included by –6 dB down points.
- Applied RMS Voltage is set to 2.83V.
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83V.
- 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- 12 dB/oct. or higher slope high-pass filter.
