Features
- 800 W continuous program power capacity
- 80° nominal coverage
- 40 - 18000 Hz response
- 99 dB sensitivity
- Single Neodymium magnet assembly
- Compatible with FB15CX40 crossover network
Specifications
- Nominal Diameter380 mm (15.0 in)
- Nominal Impedance8 Ω
- Minimum Impedance LF6.0 Ω
- Minimum Impedance HF8.0 Ω
- Frequency Range40 - 18000 Hz
- Dispersion Angle180 °
- Woofer Cone TreatmentWP Waterproof Front Side
- Magnet MaterialNeodymium Ring
Specifications LF unit
- LF Sensitivity299.0 dB
- LF Nominal Power Handling3400 W
- LF Continuous Power Handling4800 W
- LF Voice Coil Diameter76 mm (3.0 in)
- LF Winding MaterialCopper
- LF Flux Density1.15 T
- Former MaterialGlass Fibre
- Winding Depth16.5 mm (0.65 in)
- Magnetic Gap Depth8.0 mm (0.31 in)
Specifications HF unit
- HF Sensitivity5105.0 dB
- HF Nominal Power Handling680 W
- HF Continuous Power Handling7160 W
- HF Voice Coil Diameter75 mm (3.0 in)
- HF Winding MaterialAluminium
- HF Flux Density1.9 T
- Diaphragm MaterialPolyester/Titanium
- Recommended Crossover81.2 kHz
- Inductance0.14 mH
Parameters
- Resonance Frequency38 Hz
- Re5.1 Ω
- Qes0.3
- Qms5.8
- Qts0.28
- Vas246.0 dm3 (8.6 ft3)
- Sd855.0 cm2 (132.5 in2)
- η₀3.7 %
- Xmax± 4.5 mm
- Xvar± 6.0 mm
- Mms82.0 g
- Bl17.8 Txm
- Le0.9 mH
- EBP126 Hz
Mounting and Shipping Info
- Overall Diameter393 mm (15.5 in)
- Bolt Circle Diameter374 mm (14.7 in)
- Baffle Cutout Diameter354 mm (13.94 in)
- Depth198 mm (7.8 in)
- Flange and Gasket Thickness16 mm (0.62 in)
- Net Weight5.6 kg (12.3 lb)
- Shipping Units1
- Shipping Weight7.2 kg (15.87 lb)
- Shipping Box500x495x275 mm (19.69x19.49x10.83 in)
- Included by –6 dB down points.
- Applied RMS Voltage is set to 2.83V.
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83V.
- 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- 12 dB/oct. or higher slope high-pass filter.
