back
next
Diaphragm material
Magnet material
LF Voice Coil DiameterHF Voice Coil Diameter
LF Continuous Power HandlingHF Continuous Power Handling
Unique to B&C, a complete lineup of high sensitivity and power handling 4”, 5" and 6.5" frame transducers. These high technology products are made with our famously critical quality control, allowing new compact loudspeaker designs with appropriately scaled performance. Combined with a 1.4” dome compression driver, our 6CXN36 coaxial is one of the most compact and cost effective full range transducers that we have ever built, offering 90 - 18000Hz frequency response and a 70° conical coverage pattern.
Features
- 200 W continuous program power capacity
- 70° nominal coverage
- 90 - 18000 Hz response
- 90 dB sensitivity
- Aluminium demodulating ring for very low distortion
Specifications
- Nominal Diameter165 mm (6.5 in)
- Nominal Impedance8 Ω
- Minimum Impedance LF6.5 Ω
- Minimum Impedance HF7.5 Ω
- Frequency Range90 - 18000 Hz
- Dispersion Angle170 °
- Woofer Cone TreatmentWP Waterproof Front Side
- Magnet MaterialNeodymium Ring
Specifications LF unit
Specifications HF unit
Parameters
- Resonance Frequency90 Hz
- Re5.8 Ω
- Qes1.19
- Qms4.0
- Qts0.92
- Vas7.9 dm3 (0.28 ft3)
- Sd132.0 cm2 (20.46 in2)
- η₀0.47 %
- Xmax± 4.1 mm
- Xvar± 5.0 mm
- Mms9.7 g
- Bl5.2 Txm
- Le0.93 mH
- EBP75 Hz
Mounting and Shipping Info
- Overall Diameter180 mm (7.09 in)
- Bolt Circle Diameter165 mm (6.5 in)
- Baffle Cutout Diameter146 mm (5.75 in)
- Depth91 mm (3.58 in)
- Flange and Gasket Thickness6 mm (0.25 in)
- Net Weight0.74 kg (1.63 lb)
- Shipping Units1
- Shipping Weight1.19 kg (2.62 lb)
- Shipping Box255x255x150 mm (10.04x10.04x5.91 in)
Service Kit
- LF recone kitRCK006CXN368Discover more
- MF replacement diaphragmMMDDE1108Discover more
- Included by –6 dB down points.
- Applied RMS Voltage is set to 2.83V.
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83V.
- 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- 12 dB/oct. or higher slope high-pass filter.