Features
- 400 W continuous program power capacity
- 70° nominal coverage
- 60 - 18000 Hz response
- 94 dB sensitivity
- Neodymium magnet assembly
- 45.8 mm (1.8”) HF unit exit diameter
- FB10NCX dedicated crossover network
Specifications
- Nominal Diameter225 mm (10.0 in)
- Nominal Impedance8 Ω
- Minimum Impedance LF6.8 Ω
- Minimum Impedance HF7.3 Ω
- Frequency Range60 - 18000 Hz
- Dispersion Angle170 °
- Woofer Cone TreatmentTWP Waterproof Both Sides
- Magnet MaterialNeodymium Ring
Specifications LF unit
- LF Sensitivity294.0 dB
- LF Nominal Power Handling3200 W
- LF Continuous Power Handling4400 W
- LF Voice Coil Diameter65 mm (2.5 in)
- LF Winding MaterialAluminium
Specifications HF unit
- HF Sensitivity5106.0 dB
- HF Nominal Power Handling650 W
- HF Continuous Power Handling7100 W
- HF Voice Coil Diameter65 mm (2.5 in)
- HF Winding MaterialAluminium
- Diaphragm MaterialTitanium
- Recommended Crossover81.2 kHz
Parameters
- Resonance Frequency57 Hz
- Re5.6 Ω
- Qes0.35
- Qms3.7
- Qts0.32
- Vas40.0 dm3 (1.4 ft3)
- Sd320.0 cm2 (49.1 in2)
- η₀2.0 %
- Xmax± 3.0 mm
- Xvar± 6.0 mm
- Mms28.0 g
- Bl12.7 Txm
- Le1.2 mH
- EBP162 Hz
Mounting and Shipping Info
- Overall Diameter262 mm (10.3 in)
- Bolt Circle Diameter245 mm (9.6 in)
- Baffle Cutout Diameter230 mm (8.8 in)
- Depth144 mm (5.7 in)
- Flange and Gasket Thickness14 mm (0.55 in)
- Net Weight4.7 kg (10.36 lb)
- Shipping Units1
- Shipping Weight5.6 kg (12.35 lb)
- Shipping Box360x360x200 mm (14.17x14.17x7.87 in)
- Included by –6 dB down points.
- Applied RMS Voltage is set to 2.83V.
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83V.
- 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- 12 dB/oct. or higher slope high-pass filter.