X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
12_32_48_250_13_54_12_942_10nw76rear12_32_47_125_13_54_12_946_10nw76front12_32_44_775_13_54_12_950_10nw76rear_b
Continuous power handling
Voice coil diameter
Magnet material

Over the last several years, B&C has pushed neodymium magnet woofer performance to the next level. The deep, 3" (76mm) diameter voice coil utilized in the 10NW76 provides increased power handling and more overall output. A proven B&C suspension system combines a triple roll surround and single spider for superior, reliable Xmax and balanced output. An aluminium demodulation ring keeps distortion low, while the deeper, high power voice coil is cooled using a ventilated voice coil gap. Extreme performance and reliability, excellent value.

 
 
 
 

Features

  • 800 W continuous program power capacity
  • 76 mm (3 in) copper clad aluminum wire voice coil
  • 65 - 3500 Hz response
  • 97.5 dB sensitivity
  • Neodymium magnet allows a very light yet powerful motor assembly
  • Aluminium demodulating ring for very low distortion
  • Ventilated voice coil gap for reduced power

Specifications

  • Nominal Diameter250 mm (10.0 in)
  • Nominal Impedance4 Ω
  • Minimum Impedance4.5 Ω
  • Nominal Power Handling1400 W
  • Continuous Power Handling2800 W
  • Sensitivity (1W/1m)397.5 dB
  • Frequency Range65 - 3500 Hz
  • Voice Coil Diameter76 mm (3.0 in)
  • Winding MaterialCCAW
  • Former MaterialGlass Fibre
  • Winding Depth18.0 mm (0.71 in)
  • Magnetic Gap Depth10.0 mm (0.39 in)
  • Flux Density1.35 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeCurvilinear
  • Magnet MaterialNeodymium Ring
  • SpiderSingle
  • Pole DesignT-Pole
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Recommended Enclosure26.0 dm3 (0.92 ft3)
  • Recommended Tuning65 Hz

Parameters4

  • Resonance Frequency67 Hz
  • Re3.0 Ω
  • Qes0.2
  • Qms7.0
  • Qts0.19
  • Vas17.8 dm3 (0.63 ft3)
  • Sd320.0 cm2 (49.6 in2)
  • η₀2.64 %
  • Xmax± 6.5 mm
  • Xvar± 7.5 mm
  • Mms45.4 g
  • Bl17.0 Txm
  • Le0.53 mH
  • EBP335 Hz

Mounting and Shipping Info

  • Overall Diameter261 mm (10.28 in)
  • Bolt Circle Diameter246 mm (9.69 in)
  • Baffle Cutout Diameter233.0 mm (9.17 in)
  • Depth119 mm (4.69 in)
  • Flange and Gasket Thickness13 mm (0.51 in)
  • Air Volume Occupied by Driver1.5 dm3 (0.05 ft3)
  • Net Weight3.8 kg (8.38 lb)
  • Shipping Units1
  • Shipping Weight4.4 kg (9.7 lb)
  • Shipping Box295x314x175 mm (11.61x12.36x6.89 in)

Service Kit

  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2 V for 4 ohms Nominal Impedance
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.