Features
- 240 W continuous program power capacity
- 38 mm (1.5 in) copper voice coil
- 80 - 16000 Hz response
- 101 dB sensitivity
- Shorting copper cap for extended HF response
Specifications
- Nominal Diameter320 mm (12.6 in)
- Nominal Impedance8 Ω
- Minimum Impedance6.3 Ω
- Nominal Power Handling1120 W
- Continuous power handling2240 W
- Sensitivity (1W/1m)3101.0 dB
- Frequency Range80 - 16000 Hz
- Voice Coil Diameter38 mm (1.5 in)
- Winding MaterialCopper
- Former MaterialKraft Paper
- Winding Depth9.0 mm (0.37 in)
- Magnetic Gap Depth9.0 mm (0.35 in)
- Flux Density1.4 T
Design
- Surround ShapeAccordion
- Cone ShapeRadial
- Magnet MaterialFerrite Ring
- SpiderSingle
- Pole DesignStraight Pole
- Woofer Cone TreatmentNone
- Recommended Enclosure60.0 dm3 (2.12 ft3)
- Recommended Tuning75 Hz
Parameters4
- Resonance Frequency82 Hz
- Re5.4 Ω
- Qes0.52
- Qms13.3
- Qts0.5
- Vas53.0 dm3 (1.87 ft3)
- Sd522.0 cm2 (80.91 in2)
- η₀5.4 %
- Xmax± 2.0 mm
- Mms27.0 g
- Bl12.2 Txm
- Le1.1 mH
- EBP157 Hz
Mounting and Shipping Info
- Overall Diameter316 mm (12.44 in)
- Bolt Circle Diameter298 mm (11.73 in)
- Baffle Cutout Diameter286.0 mm (11.26 in)
- Depth136 mm (5.35 in)
- Flange and Gasket Thickness12 mm (0.47 in)
- Air Volume Occupied by Driver3.0 dm3 (0.11 ft3)
- Net Weight4.6 kg (10.14 lb)
- Shipping Units1
- Shipping Weight5.5 kg (12.13 lb)
- Shipping Box360x360x200 mm (14.17x14.17x7.87 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.