Features
- 200 W continuous program power capacity
- 38 mm (1.5 in) aluminium voice coil
- 230 - 10000 Hz response
- 96 dB sensitivity
- Shorting copper cap for extended HF response
Specifications
- Nominal Diameter127 mm (5.0 in)
- Nominal Impedance16 Ω
- Minimum Impedance14.5 Ω
- Nominal Power Handling1100 W
- Continuous power handling2200 W
- Sensitivity (1W/1m)396.0 dB
- Frequency Range230 - 10000 Hz
- Voice Coil Diameter38 mm (1.5 in)
- Winding MaterialAluminium
- Former MaterialGlass Fibre
- Winding Depth10.0 mm (0.39 in)
- Magnetic Gap Depth6.0 mm (0.24 in)
- Flux Density1.25 T
Design
- Surround ShapeTriple Roll
- Cone ShapeExponential
- Magnet MaterialNeodymium Ring
- SpiderSingle
- Pole DesignStraight Pole
- Woofer Cone TreatmentWP Waterproof Front Side
Parameters4
- Resonance Frequency230 Hz
- Re11.7 Ω
- Qes0.57
- Qms3.0
- Qts0.48
- Vas0.8 dm3 (0.03 ft3)
- Sd95.0 cm2 (14.7 in2)
- η₀1.7 %
- Xmax± 3.5 mm
- Xvar± 2.5 mm
- Mms8.0 g
- Bl15.0 Txm
- Le0.7 mH
- EBP403 Hz
Mounting and Shipping Info
- Overall Diameter155 mm (6.1 in)
- Bolt Circle Diameter142 mm (5.6 in)
- Baffle Cutout Diameter122.0 mm (4.8 in)
- Depth75 mm (2.95 in)
- Flange and Gasket Thickness9 mm (0.35 in)
- Air Volume Occupied by Driver0.35 dm3 (0.01 ft3)
- Net Weight0.94 kg (2.07 lb)
- Shipping Units1
- Shipping Weight1.14 kg (2.51 lb)
- Shipping Box210x210x125 mm (8.27x8.27x4.92 in)
- 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 4V for 16 ohm Nominal Impedance
- Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.
