X
MENU

Product Archive

Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

15RBX100

LF Drivers 15.0 inches

back
00_53_43_648_15rbx100_0000_53_42_751_15_rbx_002_web02_27_08_763_15_rbx_003_web
Continuous power handling
Voice coil diameter
Magnet material

The B&C 15RBX100 anchors our ferrite subwoofer line, and features an all new FEA optimized motor structure. The 25mm high, 4” (100mm) diameter copper wire voice coil is combined with a laminated double silicone spider, water resistant curvilinear cone and triple roll surround, for even more excursion and linearity.

The corrosion resistant motor structure incorporates an aluminum demodulation ring that effectively controls inductive rise as well as harmonic and intermodulation distortion. This subwoofer can be used for a wide variety of applications, including compact vented enclosures.

 
 
 
 

Features

  • 2000 W continuous program power capacity
  • 100 mm (4 in) copper voice coil
  • 40 - 3000 Hz response
  • 95 dB sensitivity
  • Aluminium demodulating ring allows a very low distortion figure
  • Double silicone spider with optimized compliance

Specifications

  • Nominal Diameter380 mm (15.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.4 Ω
  • Nominal Power Handling11000 W
  • Continuous power handling22000 W
  • Sensitivity (1W/1m)395.0 dB
  • Frequency Range40 - 3000 Hz
  • Voice Coil Diameter100 mm (4.0 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth25.0 mm (1.0 in)
  • Magnetic Gap Depth11.0 mm (0.43 in)
  • Flux Density1.1 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeCurvilinear
  • Magnet MaterialFerrite
  • SpiderDouble Silicone
  • Pole DesignT-Pole
  • Woofer Cone TreatmentTWP Waterproof Both Sides
  • Recommended Enclosure85.0 dm3 (3.0 ft3)
  • Recommended Tuning45 Hz

Parameters4

  • Resonance Frequency44 Hz
  • Re5.3 Ω
  • Qes0.4
  • Qms5.65
  • Qts0.38
  • Vas100.0 dm3 (3.53 ft3)
  • Sd908.0 cm2 (140.74 in2)
  • η₀2.0 %
  • Xmax± 9.0 mm
  • Xvar± 10.0 mm
  • Mms154.0 g
  • Bl24.0 Txm
  • Le1.2 mH
  • EBP110 Hz

Mounting and Shipping Info

  • Overall Diameter393 mm (15.47 in)
  • Bolt Circle Diameter374 mm (14.72 in)
  • Baffle Cutout Diameter354.0 mm (13.94 in)
  • Depth173 mm (6.81 in)
  • Flange and Gasket Thickness16 mm (0.63 in)
  • Air Volume Occupied by Driver5.0 dm3 (0.18 ft3)
  • Net Weight10.6 kg (23.37 lb)
  • Shipping Units1
  • Shipping Weight11.9 kg (26.24 lb)
  • Shipping Box425x425x224 mm (16.73x16.73x8.82 in)

Service Kit

  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.