X
MENU
ENES

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4CXN36

4CXN36

Coaxials 4.0 inches

compare
Drawing
Datasheet
back
14_29_31_171_14_12_27_205_4cxn36_0214_29_31_592_09_22_55_166_4cxn36_000_etc
Diaphragm material
Magnet material
LF Voice Coil Diameter
HF Voice Coil Diameter
LF Continuous Power Handling
HF Continuous Power Handling
Unique to B&C, a complete lineup of high sensitivity and power handling 4”, 5" and 6.5"  frame transducers. These high technology products are made with our famously critical quality control, allowing new compact loudspeaker designs with appropriately scaled performance. Combined with a 1.4” dome compression driver, our 4CXN36 coaxial is the most compact and cost effective full range transducer we have ever built, offering 110 - 18000Hz frequency response and a 70° conical coverage pattern. 
 
 
 
 
 
 

Features

  • 200 W continuous program power capacity
  • 70° nominal coverage
  • 110 - 18000 Hz response
  • 86 dB sensitivity
  • Neodymium magnet allows a very light yet powerful motor assembly
  • Aluminium demodulating ring allows a very low distortion figure

Specifications

  • Nominal Diameter100 mm (4.0 in)
  • Nominal Impedance16 Ω
  • Minimum Impedance LF12.0 Ω
  • Minimum Impedance HF10.2 Ω
  • Frequency Range110 - 18000 Hz
  • Dispersion Angle170 °
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Magnet MaterialNeodymium Ring

Specifications LF unit

  • LF Sensitivity286.0 dB
  • LF Nominal Power Handling3100 W
  • LF Continuous Power Handling4200 W
  • LF Voice Coil Diameter34 mm (1.34 in)
  • LF Winding MaterialCopper
  • LF Flux Density0.74 T
  • Former MaterialGlass Fibre
  • Winding Depth11.2 mm (0.44 in)
  • Magnetic Gap Depth6.0 mm (0.24 in)

Specifications HF unit

  • HF Sensitivity5102.0 dB
  • HF Nominal Power Handling625 W
  • HF Continuous Power Handling750 W
  • HF Voice Coil Diameter36 mm (1.4 in)
  • HF Winding MaterialAluminium
  • HF Flux Density1.65 T
  • Diaphragm MaterialHT Polymer
  • Recommended Crossover82.0 kHz
  • Inductance0.14 mH

Parameters

  • Resonance Frequency110 Hz
  • Re10.9 Ω
  • Qes1.05
  • Qms12.1
  • Qts0.97
  • Vas1.6 dm3 (0.06 ft3)
  • Sd56.0 cm2 (8.68 in2)
  • η₀0.19 %
  • Xmax± 4.1 mm
  • Xvar± 5.0 mm
  • Mms5.8 g
  • Bl6.43 Txm
  • Le1.26 mH
  • EBP104 Hz

Mounting and Shipping Info

  • Overall Diameter127 mm (5.0 in)
  • Bolt Circle Diameter114 mm (4.51 in)
  • Baffle Cutout Diameter103 mm (4.06 in)
  • Depth84 mm (3.31 in)
  • Flange and Gasket Thickness3 mm (0.12 in)
  • Net Weight0.54 kg (1.19 lb)
  • Shipping Units1
  • Shipping Weight0.75 kg (1.65 lb)
  • Shipping Box210x210x125 mm (8.27x8.27x4.92 in)

Service Kit

  • Included by –6 dB down points.
  • Applied RMS Voltage is set to 4V.
  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 4V.
  • 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • 12 dB/oct. or higher slope high-pass filter.