X
MENU

Products

Browse
Compare
Products
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
back
08_06_11_104_5_fg_44_rear_0008_06_11_336_file08_06_11_312_5fg44rear_b
Continuous power handling
Voice coil diameter
Magnet material
 
 
 
 

Features

  • Capacidad de potencia de programa continuo: 200 W
  • Bobina de alambre de cobre: 44 mm (1.7 in)
  • Respuesta: 63 - 6000 Hz
  • Sensibilidad: 90 dB

Specifications

  • Nominal Diameter127 mm (5.0 in)
  • Nominal Impedance16 Ω
  • Minimum Impedance12.7 Ω
  • Nominal Power Handling1100 W
  • Continuous power handling2200 W
  • Sensitivity (1W/1m)390.0 dB
  • Frequency Range70 - 6000 Hz
  • Voice Coil Diameter44 mm (1.7 in)
  • Winding MaterialCopper
  • Former MaterialKapton
  • Winding Depth9.0 mm (0.35 in)
  • Magnetic Gap Depth6.0 mm (0.25 in)
  • Flux Density1.1 T

Design

  • Surround ShapeRoll
  • Cone ShapeExponential
  • Magnet MaterialFerrite
  • SpiderSingle
  • Pole DesignT-Pole
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Recommended Enclosure5.0 dm3 (0.17 ft3)
  • Recommended Tuning70 Hz

Parameters4

  • Resonance Frequency70 Hz
  • Re11.1 Ω
  • Qes0.4
  • Qms10.5
  • Qts0.39
  • Vas5.1 dm3 (0.18 ft3)
  • Sd92.0 cm2 (14.26 in2)
  • η₀0.42 %
  • Xmax± 3.0 mm
  • Xvar± 5.0 mm
  • Mms12.0 g
  • Bl11.6 Txm
  • Le0.8 mH
  • EBP175 Hz

Mounting and Shipping Info

  • Overall Diameter155 mm (6.1 in)
  • Bolt Circle Diameter142 mm (5.6 in)
  • Baffle Cutout Diameter122.0 mm (4.8 in)
  • Depth77 mm (3.03 in)
  • Flange and Gasket Thickness9 mm (0.35 in)
  • Air Volume Occupied by Driver0.5 dm3 (0.02 ft3)
  • Net Weight1.6 kg (3.53 lb)
  • Shipping Units1
  • Shipping Weight1.8 kg (3.97 lb)
  • Shipping Box210x210x125 mm (8.27x8.27x4.92 in)

Service Kit

  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 4V for 16 ohm Nominal Impedance
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.