1. Home

  2. Support

  3. Speakers recone guide

Support

Speakers recone guide

Caution: While we are pleased to provide this information on how to recone woofers, we strongly recommend that you seek professional support for these procedures in order to ensure long term component performance. Using the correct repair process and adhesives is critical.

If you wish to proceed, please follow these steps very carefully, and read the entire document before starting the process.

Supplies and Tools Required:

  • Soldering Iron
  • Solder
  • Sharp utility knife
  • Masking Tape
  • Double sided tape
  • Sharp scraping tool or Chisel
  • Two Component Epoxy or Rubber Type glue
  • Plastic Shims
  • Small weigh
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10

ATTENTION: Some recone kits include a small bottle containing the waterproof treatment. Apply a coat of the treatment over the cone and the dome with a brush, then wait for the complete drying. Please note that the cone suspension should not be treated.

Associated documents